Welding

Handheld laser welding machines

Fourteen models across four architectures: air-cooled all-in-one from 4 to 7 mm, liquid-cooled heavy duty to 8.5 mm, the sub-19 kg P30, and the industrial WSH line.

Handheld Laser Welding

In this range

14 models

P40P60P70A55A65A85P30WSH03T-MAWSH03T-CWWSH04T-CWWSH05T-CWWSH07T-CWWSH150Q-MAWSH150ST-MA

3–8.5 mm penetration. Air-cooled, liquid-cooled or industrial chiller. Replaces TIG on 0.5–8.5 mm sheet and plate.

  • Genuine Han's Laser equipment with manufacturer documentation
  • Certificates and parameter sheets on request
  • Consumables supplied on a repeat schedule from Guangzhou
  • Remote commissioning and parameter support on WhatsApp

Models

Where to start

Welding

Red Crystal — P40 / P60 / P70

Phase-change air-cooled all-in-one, 29–39 kg, 4–7 mm single-pass, no chiller and no water tank.

View details
Welding

Sapphire — A55 / A65 / A85

Composite liquid cooling, 45–55 kg, 5.5–8.5 mm single-pass, 24-hour duty at 45 °C ambient.

View details
Welding

Black Crystal P30 — sub-19 kg

Six components in one body, laser source under 19 kg. The one that goes up the ladder.

View details
Welding

P40 — multi-function system

The model most first-time buyers start from: 4 mm stainless, 29 kg, built-in wire feeder.

View details
Welding

Zu Jin series — 7 models

Industrial WSH line: 3, 4, 5 or 7 mm, air-cooled or water-cooled, three-phase from 5 mm up.

View details

The listed-giant advantage (SZSE: 002008)

What Han's Laser's US$2.05B engineering backbone actually means for your workshop

Every seller claims “factory direct”. Here is the difference between a group that has been building lasers since 1996 and a shop that bolts three vendors' boxes together — stated as what it changes on your floor, not as a corporate slogan.

Han's Laser fact

8,949 patents · 6,581 R&D engineers

One ecosystem, not a Franken-machine

What it means in your shopA white-label machine is a third-party laser source, a generic gun and an external feeder box that never quite speak to each other — which is why aluminium welds stutter and protective lenses die early. Han's Laser designs the fiber source, the built-in H300 dual-drive feeder, the sub-480 g QCS torch and the T-Mode anti-reflection optics as one system, and our field data shows lens burnouts dropping by roughly 60%.

Han's Laser fact

Founded 1996 · publicly listed group (US$2.05B revenue)

Ten-year parts security, not a trader who vanishes

What it means in your shopA large share of small assembly shops leave the market within a year or two, and their buyers are left with a machine nobody can service and no way to source parts. Every unit we ship carries a serial from a listed industrial group that has been making lasers since 1996 — genuine nozzles, lenses and board-level spares stay orderable for a decade, not for a season.

Han's Laser fact

3,000+ factory burn-in tests · Ophir lab verified

8.8 hours at full load, not a 30-minute slide

What it means in your shopClone machines lose a visible share of their power after half an hour of continuous welding, because cooling is the last thing anyone designs. Our phase-change air-cooled heads (-20 °C to +40 °C) and composite liquid-cooled heads (-20 °C to +45 °C, held to ±0.3 °C) keep output within ±1% to ±3% across 8.8 hours of nonstop production — so the 6 mm weld at the end of the shift matches the one at the start.

Not sure which model in this range?

Tell us the thickness and the joint. We will name one model — or tell you this range is wrong for the job.

Get a quote on WhatsApp Request a quote form
WhatsApp